Land Clearing in Los Angeles County, CA

Tree problems in Los Angeles County, CA that call for land clearing

1. 1

   The LA County oak tree ordinance

   In unincorporated areas, no one may cut, destroy, remove, relocate, damage or encroach into the protected zone of any oak that is 25 inches or more in circumference (8 inches in diameter) at 4.5 feet above natural grade without first getting an oak tree permit. The protected zone extends 5 feet beyond the drip line or 15 feet from the trunk, whichever is greater, so grading, trenching, paving or even heavy equipment parked under an oak can require a permit.

2. 2

   Wildfire clearance in the foothills and canyons

   Much of the county's foothill and canyon land, from Malibu and the Santa Monica Mountains to the San Gabriel foothills, is in designated fire hazard areas, where state law requires 100 feet of defensible space around homes. The county fire department inspects for brush clearance. Tree work for clearance usually means removing dead trees and limbs, keeping branches 10 feet from chimneys and off roofs, and limbing up trees so fire can't climb into them.

3. 3

   Santa Ana winds and emergencies

   Santa Ana wind events, most common from fall into winter, bring dry gusts that topple shallow-rooted trees and break eucalyptus and pine limbs. Lines down go to Southern California Edison or LADWP depending on your area. A tree on a house is an emergency regardless of species; deal with permits afterward with documentation.